Uponor Smatrix Base User Manual

14.12 System info
This menu shows information about current software
versions, the number of controllers connected and other
interface specific information.
14.13 Preferences
In this menu, settings specific to the interface are made.
language
Select language. Current language is shown in the icon
before entering the setting.
More languages than shown in the list can be added
using the microSD card.
disPlay
Backlight:
Default: 80%
Setting range: 1 0 – 100%, 1% increments
Set backlight intensity
Return screen settings:
Default: House
Setting range: House, Alarms, Trends
Select which home screen to exit to, after about 3
minutes of inactivity.
Screen saver:
Default: Inactive
Setting range: Active, Inactive
Activate the screen saver. The screen will, after about
3 minutes of inactivity, exit to the home screen and
dim the brightness to about 10%. It will brighten again
when touched.
Switch off backlight during night?:
Default: No
Setting range: No, Yes
When activated the screen will, between 22:00 and
07:00, exit to the home screen and then shut it off after
about 3 minutes of inactivity. It will start again when
touched.
Screen lock:
Default: Inactive
Setting range: Active, Inactive
This function requires a microSD card when being
activated. It can be removed afterwards if needed
without affecting the function or PIN-code.
Activate the screen lock and set a PIN-code in the
settings menu. The screen will revert to the home screen
and lock after 3 minutes of inactivity. To unlock, press
the lock-icon on the home screen and enter the set
PIN-code. If an incorrect PIN-code is entered 3 times,
instructions will appear on the screen on how to retrieve
the PIN.
The PIN-code can be changed by accessing the settings
menu once again and entering a new code.
The PIN-code is saved in a text-file (TS_Lock.txt) on
the microSD card. It can be easily retrieved and viewed
using a computer. Editing or deleting the text-file will
not change or deactivate the PIN-code on the interface.
Screen cleaner:
The screen cleaner deactivates the touch screen for
about 30 seconds, allowing the user to clean the screen
without pushing any on-screen buttons.
regio nal se ttings
Set a time and date format, and temperature unit to use
in the interface.
linK
Register and/or unregister one or more controllers to
the interface.
Link touchscreen to controller:
See section 8.5 Startup guide > Register the interface to
a controller for more information.
Unlink touchscreen from interface:
Select the controller to be unregistered from the
list, and confirm the choice by pressing the green
checkmark.
date & time
Set time and date for the system.
faCtory reset
Reset the interface to default values.
UK
CZ
DE
DK
EE
ES
FI
FR
HR
HU
IT
LT
LV
NL
NO
PL
PT
RO
RU
SE
SK
107
UPONOR SMATRIX BASE/BASE PRO · INSTALLATION AND OPERATION MANUAL

Uponor Smatrix Base Specifications

General

Brand	Uponor
Model	Smatrix Base
Category	Heating System
Language	English