DS1093-162A 37
Click [Edit] button to enter into the [User Edit] interface shown as below:
User name consist of eight characters, password consist of 0~8 and its fixed-length is 8 bit.
Note:
The user can change the own Password without Administrator’s authorization.
The password must be eight characters long.
If the administrator level password or user level password is enabled, the password has to be
customized.
If the administrator password is deactivated and the user password is customised, the default
administrator password “admin” will be empty and enabled automatically.
Please don’t lose or forget the password for any reason! Take a note for the set passwords and keep
them in Safe Site.
[Admin] is authorized to set common user’s authority.
• Log Search: allow you check the entire system log.
• Parameter: allow you set all the parameters.
• Maintain: allow you update version, recover ex-factory value, device reboot and shut down.
• Disk Manage: allow you manage and control the HDDs.
• Remote Login: allow you remote login DVR.
• Rotate Control: allow you sequence live screens for all the channels.
• Manual record: allow you manually start/stop record.
• Backup: Tick-select the option, the user is allowed to backup the record of all the channels.
• Live: Tick-select the option and the user is allowed to view all the live images for all the channels.
• Playback: Tick-select the option and the user is allowed to playback the record you selected.
• PTZ control: Tick-select the option and the user is allowed to perform the PTZ operation for the selected
channel.
2.4.7.5 Information
Click [Main MenuSystemInfo] and then enter into the interface shown as below
To Next Page
Loading...
Need help?
General
