DS1093-162A 47
Secondly, select record type (Normal record, Alarm record and All) and then click < > button shown as below. On
the time axis, red part stand for alarm record, yellow stand for normal record and original part stand for no record during
this period.
If you tick-select < > option, that means the selected channel will playback synchronously; otherwise, you
could separately control the channels playback.
Thirdly, Click [ ] icon to start record playback. When mouse curse is moving on the time axis, the current time will
appear in the screen.
Click [ / ] icon to zoom in/out the time bar display ratio shown as below.
3.3.2 PLAYBACK CONTROL
Below is playback control bar
Detail brief description is shown as below list
Key Description Key Description
Play
Open/close audio
Pause
Volume adjust
Stop
Playback control bar (x1/2,1/4,1/8, normal, x2, x4,
x8)
By frame
Stop all the play
Clip
Single channel mode
Capture
Quad mode
Download
Full screen
Open all the channels
Stop all the channels
To Next Page
Loading...
Need help?
General
