OM 25-3503 us – Edition 4.1 * 2503_3503b110.fm 1-11
Introduction
1.8 Type labels and component numbers
Information!
Type, quantity and position of the labels depend on options, country and machine.
Serial no. AG00580
The serial number is stamped on the machine chassis. It is also located on the type label.
The type label is located at the front right on the machine chassis (at cabin level)
Type label information
Example:
Machine designation: ---------------
Model: ---------------
Model year: ---------------
CEE no.: ---------------
Output: ---------------
Serial no.: ---------------
Max. payload: ---------------
GWR: ---------------
Operating weight: ---------------
Front GAWR: ---------------
Transport weight: ---------------
Rear GAWR: ---------------
Version: ---------------
Other information – see chapter 6 Technical datac on page 6-1
17-digit serial number (from 2012)
For easier machine identification, Wacker Neuson introduced a 17-digit serial number for
compact equipment in 2012 (for example for excavators). This serial number includes
additional data, for example the manufacturer code and the production site.
Fig. 1: Type label: location
Fig. 2: Type label (symbolic representation)
12345 6
WNC E 1301 A PAL 00400
A
S
D
Fig. 3: Symbolic representation
Position Description
1 Manufacturer code
2 Machine model
AUnit
S Compact loader
D Dumper
E Excavator
3 Internal model designation
4 Check letter
5 Production site
6 Serial number
To Next Page
Loading...
Need help?
General
