Xerox 6204 User Manual

Setting Up the [More Features] selections
Xerox 6204 Wide Format Solution 95
Scan
4
2 When scanning a non-standard width original,
select [Variable Width].
The [Scan Width] selection screen will display.
3 Using either the numeric keypad or the scroll
buttons, enter the desired scan width, and then
select [Save].
Scan Offset
When the Scan Offset feature is enabled, and a scan offset position is defined, the
machine will ignore image information from the lead edge to the scan offset position.
This enables you to eliminate unnecessary detail from the lead edge of an original. The
scan offset position can be set up from 0 to 39.3 inches, in 0.1 inch increments.The
factory default setting is [Disabled].
Procedure
1 Select the [Scan Offset] button.
The [Scan Offset] screen will display.

Xerox 6204 Specifications

General

Brand	Xerox
Model	6204
Category	All in One Printer
Language	English