3 Copy
52 Xerox 6204 Wide Format Solution
Copy
3
Creating Collated Copies
Collated copies can be produced for jobs that involve multiple originals. The originals
in the set also can be mixed, that is, of different types (text, photo, etc.). A maximum of
256 pages may be scanned in each collation job. The factory default setting for
Collation is [None].
Note: For uncollated copies, the machine prints the specified quantity of the first page, then
the specified quantity of the next, and so on. For collated output, the machine sorts the
copies into sets.
Procedure
1 Select the [Basic Copy] tab on the [Copy]
screen.
2 Select the [Collation] button.
The [Collation (Sets)] menu will display.
3 Select the desired collation option, that is, either
[Forward] or [Reverse]. You also may select
[Checkplot].
[Forward]
If the originals are scanned from number 1 to n, page 1 will be at the top of the output stack.
[Reverse]
If the originals are scanned from number n to 1, page 1 will be at the bottom of the output stack.
[Checkplot]
Select [Checkplot] if you want a printed, proof copy (checkplot) after you scan each document
and before they are printed as sets.
Uncollated Collated
To Next Page
Loading...
Need help?
General
