6 System Setup
132 Xerox 6204 Wide Format Solution
System Setup
6
Network Settings
You can set up DHCP (Dynamic Host Configuration Protocol), the IP address, Subnet
Mask, and Gateway on the [Network Settings] screen. The new settings will take effect
immediately.
Note: The network settings also can be set up using the Web Print Management Tool. Refer to
the Web Print Management Tool online help for more information.
Procedure
1 Select the [Setup] button on the [Menu] screen.
The [Setup] menu will display.
2 Select [Network Settings] on the [Setup] menu.
The [Network Settings] menu will display.
3 Select [DHCP].
The [DHCP] screen will display.
4 Set DHCP to either [Off] or [On], and then select
[Save].
To Next Page
Loading...
Need help?
General
