Setting Up the [More Features] selections
Xerox 6204 Wide Format Solution 97
Scan
4
Mirror Image
The Mirror Image feature enables you to reverse the left and right sides of the scanned
image, the top and bottom of the scanned image, or a combination of both. The factory
default setting is [Off].
Procedure
1 Select the [Mirror Image] button.
The [Mirror Image] screen will display.
2 Select [Off], [X], [Y], or [XY].
Off
Mirror image is not applied to copies.
X
Copies are made with the left and right sides of
the original image reversed.
Y
Copies are made with the top and bottom of the
original image reversed.
XY
Copies are made with the top and bottom of the original image, and with the left and
right sides of the original image reversed.
3 Select [Save].
Note: When the width of the original is less than the Scan Width, such as occurs with non-standard
originals, a margin will be present on the left side.
Original detection width
Original detection width
To Next Page
Loading...
Need help?
General
