Timers
Xerox 6204 Wide Format Solution 137
System Setup
6
3. Features
Controls how long the current feature parameters remain in effect after the last key
press, scan completion, or insertion of a document into the scanner. The [Feature]
timer can be set between 0 and 99 minutes. A value of 0 means that the feature will
never time out. The default value for [3. Features] is [1 Minute].
Procedure
1 Select the [Setup] button on the [Menu] screen.
The [Setup] menu will display.
2 Select [Timers] on the [Setup] menu.
The [Timers] menu will display.
3 Select [3. Features].
The [Feature Timeout] screen will display.
4 Use either the scroll buttons or the numeric
keypad to select the desired setting, and then
select [Save].
5 Select [Close] on the [Timers] menu to return to
the [Setup] menu.
To Next Page
Loading...
Need help?
General
