2 Product Overview
28 Xerox 6204 Wide Format Solution
Product Overview
2
Powering the System On/Off
Although the printer and controller may be powered on and off manually, the
recommended procedure is to allow the Power Saver feature to manage the machine
power.
Using the Power Saver Feature
The Power Saver feature automatically reduces the power consumption when no print
data is received within a preset period. The Power Saver feature has two modes, [Low
Power mode] and [Sleep mode].
The machine enters the [Low Power mode] after a preset period elapses. The machine
transitions to the [Sleep mode] from the [Low Power mode] if the machine remains idle
for an additional period.
Note: Refer to "Timers" (P.134) to learn how to customize the Power Saver mode settings.
Low Power Mode
In this mode, the power to the control panel and the fuser is reduced. As the machine
enters the [Low Power mode], the touch screen
shuts down and the <Power Saver>
button on the control panel illuminates.
Sleep Mode
In this mode, the power is reduced more than in the [Low Power mode]. During the
transition from the Low Power mode to the Sleep mode, the touch screen will remain
dark and the <Power Saver> button will remain illuminated.
Entering the Power Saver Mode
The Power Saver Mode may be entered either automatically or manually.
Automatic Method: The machine will enter the
[Low Power mode] after a preset period elapses.
The machine will enter the [Sleep mode] from the
[Low Power mode] if the machine remains idle for
an additional, preset period.
Manual Method: Press the <Power Saver>
button on the control panel. The button will
illuminate, the machine will enter the [Low Power
mode], and the touch screen’s backlight will
extinguish.
<Power Saver>
To Next Page
Loading...
Need help?
General
