3 Copy
72 Xerox 6204 Wide Format Solution
Copy
3
Margins
The Margins feature enables you to add margins (white space) at the top, bottom, left,
and/or right edges of copies. All margins may be defined in a range from -8.0 to +8.0
inches, in increments of 0.1 inch.
The factory default setting is [0] for the top, bottom, left, and right margins.
Procedure
1 Select [Margins] on the top [1] [More Features]
tab.
The [Margins] screen will display.
2 Select the input field or fields where you wish to
add margins, then enter the desired value using
either the numeric keypad or the scroll buttons.
Note: To enter a negative number on the numeric
keypad, either scroll to the negative number or
press the toggle button.
3
Select [Save] after making the required settings.
When making copies from a book or other unique originals, black shadows sometimes
appear along the edges of the paper. If this happens, you can make copies with the
shadows erased.
Note: When Reduce/Enlarge is set up, the border erase amount is proportionately changed.
Trail
Copy
To Next Page
Loading...
Need help?
General
