Common Settings
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide 191
Audio Tones
Use this feature to select the volume level of tones to be generated at various
occasions. You can choose different volume levels for each item shown on the screen.
1. Select [Audio Tones] on the
[Common Settings] screen.
2. Use the scroll buttons to switch
between screens.
3. Perform the necessary
operations.
4. Select [Close].
Control Panel Select Tone
Select the volume level of the tone generated when an appropriate button on the
control panel is pressed and its action is accepted.
Control Panel Alert Tone
Select the volume level of the tone generated when an inappropriate button on the
control panel is pressed.
Machine Ready Tone
Select the volume level of the tone generated when the machine becomes ready to
copy or print, for example, after the power is switched on.
Copy Job Complete Tone
Select the volume level of the tone generated when copying finishes successfully.
Non-Copy Job Complete Tone
Select the volume level of the tone generated when a job other than copying finishes
successfully.
Fault Tone
Select the volume level of the tone generated when a job did not finish properly.
Alert Tone
Select the volume level of the tone generated when a job is suspended due to an error.
Out of Paper Warning Tone
Select the volume level of the tone generated when the machine runs out of paper.
To Next Page
Need help?
General
