Xerox CopyCentre C123 User Guide

11 Setups
226 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide
Maximum Stored Pages
Specify the maximum number of pages to be stored in memory through scanning.
Select the number in the range from 1 to 999.
TIFF Format
Specify the type of the TIFF format to be used when TIFF is selected for saving
scanned data.
Image Transfer Screen
Specify how the screen should appear when scanning is finished. If you select [Hide
Message and Screen], no message is displayed when scanning is finished.
Fax Mode Settings
This screen allows you to change the default settings for the fax mode. There are eight
main setup options available. For more information, refer to the following.
Screen Defaults – page 226
Fax Defaults – page 227
Fax Control – page 228
File Destination/Output Destination – page 231
Reduce/Enlarge Presets – page 232
Scan Size Defaults – page 232
Local Terminal Information – page 233
Internet Fax Control – page 234
1. Select [Fax Mode Settings] on
the [System Settings] screen.
2. Select the required option.
3. Select [Close].
Screen Defaults
Use this feature to define the initial settings for the fax feature screens to suit your
needs.
1. Select [Screen Defaults] on the
[Fax Mode Settings] screen.
2. Use the scroll buttons to switch
between screens.
3. Perform the necessary
operations.

Xerox CopyCentre C123 Specifications

General

Brand	Xerox
Model	CopyCentre C123
Category	All in One Printer
Language	English