Xerox CopyCentre C123 User Guide

15 Maintenance
302 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide
The Document Glass and Constant Velocity Transport Glass
To ensure optimum print quality at all times, clean the document glass and constant
velocity transport glass monthly, or more often if needed. This helps avoid streaks,
smears and other marks on the printed output.
1. To clean the glass areas, use a
lint-free cloth, lightly dampened
with water or Xerox Lens and
Mirror Cleaner.
2. Clean the white tabs, located on
the under side of the document
glass cover and in the document
feeder, to remove dry ink
smudges and other marks.
The Control Panel and Touch Screen
Regular cleaning keeps the touch screen and control panel free from dust and dirt. To
remove finger prints and smudges, clean the control panel and touch screen with a soft,
lint-free cloth, slightly moistened with water.
NOTE: The machine should be switched off before cleaning the control panel to
prevent unintended operation.
The Document Feeder and Output Trays
Use a cloth moistened with water to clean the document feeder, output trays, paper
trays and the outside areas of the machine.
Replacing the Drum Cartridge
The drum cartridge is a customer replaceable unit. After approximately 60,000 copies/
prints, the machine will display a warning message before the drum reaches the end of
life. Order a replacement cartridge now to insure continuous operation.
Removing the Old Drum Cartridge
1. Pull the front cover towards you
to open it.
Document glass
Constant velocity
transport glass

Xerox CopyCentre C123 Specifications

General

Brand	Xerox
Model	CopyCentre C123
Category	All in One Printer
Language	English