11 Setups
198 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide
Date Format
Select the format for date printing for the [Annotation] and [Set Numbering] features.
Set Numbering - Text Size
Specify the size of text used for the [Set Numbering] feature.
Set Numbering - Density
Specify the density of text used for the [Set Numbering] feature.
Offset Stacking (Center Output Tray)
When printing to the Center Output Tray, the machine can slightly offset the paper
output positions for each set (copies) or job (individually instructed print job). This
allows you to identify the start of each set or job.
Offset Stacking (Finisher Tray)
When printing to the Finisher Tray, the machine can slightly offset paper output
positions for each set (copies) or job (individually instructed print job). This allows you
to identify the start of each set or job.
Extended Tray Module
Select the type of the Extended Tray Module used. If the optional finisher is installed,
select [Offset Stacking Module].
Default Print Paper Size
Specify the paper size to be used as the initial setting.
Odd Page 2 Sided
Select whether to add a blank page to a document that contains an odd number of
pages to print it as an even number of pages. This prevents the wrong side of paper to
be printed when the paper has a different color or texture on a particular side.
Paper Size Settings
Specify the paper size table used when the machine is set to detect standard sizes of
documents and recording media automatically.
You can select from the following tables: [A/B Series (8 × 13”)], [A/B Series], [A/B
Series (8K/16K)], [A/B Series (8 × 13”/8 × 14”)], and [Inch Series].
Documents
The machine automatically recognizes the following sizes when a document is placed
on the document glass or loaded in the document feeder.
To Next Page
Loading...
Need help?
General
