Xerox CopyCentre C123 User Guide

17 Specifications
338 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide
Machine Weight
CopyCentre with Document Glass Cover: 60 kg (132 lbs)
Copier Speed
From Tray 1/One-sided:
CopyCentre/WorkCentre/WorkCentre Pro 123
A4/Letter LEF: 23 cpm (cycles per minute) (single-sided/double-sided mode)
A3/11 × 17” SEF: 13 cpm (cycles per minute) (single-sided mode)
A3/11 × 17” SEF: 8 cpm (cycles per minute) (double-sided mode)
CopyCentre/WorkCentre/WorkCentre Pro 128
A4/Letter LEF: 28 cpm (cycles per minute) (single-sided/double-sided mode)
A3/11 × 17” SEF: 15 cpm (cycles per minute) (single-sided mode)
A3/11 × 17” SEF: 10 cpm (cycles per minute) (double-sided mode)
First Copy Out Time
From Tray 1/A4 or Letter LEF: 4.5 seconds
Warm-up Time
Cold Start: Approximately 12 seconds (varies with machine configuration)
Document Glass
Capacity: A document within 30 mm of thickness can be copied with the document
glass cover / feeder closed.
Document Sizes: (Standard size) A5 LEF to A3 SEF
(Custom size) width: 15 to 297 mm (0.6 to 11.7”) / length: 15 to
432 mm (0.6 to 17.0”).
Document Weights: 38 to 128 g/m
2
(50 to 128 g/m
2
in double-sided mode)
Auto Size Sensing: Yes
NOTE: The standard sizes of documents that can be detected vary depending on the
paper size table specified by the Key Operator. For information on setting the paper
size table, refer to Paper Size Settings in the Setups chapter on page 198.
Document Feeder
Capacity: 50 sheets of 38 to 128 g/m
2
(50 to 128 g/m
2
in double-sided mode)
Document Sizes: (Standard size) A5 to A3 SEF (5.5 × 8.5” to 11 × 17” SEF)
(Custom size) for width: 139.7 to 297 mm (5.5 to 11.7”) / for length:
210 to 432 mm (8.3 to 17.0”).
Long Document Scan Feature: 297 × 600 mm (11.7 × 23.6”)
maximum length

Xerox CopyCentre C123 Specifications

General

Brand	Xerox
Model	CopyCentre C123
Category	All in One Printer
Language	English