Xerox Phaser 8860 User Manual

09/2007
6-22
Phaser 8860/8860MFP Service Manual
Print Engine Check Menu Tests
Initial Issue
Diagnostics
Paper Drive Power / Duplex Drive Power
This test measures required drive power (in Watts).
Paper Leading Edge Times / Duplex Paper Leading Edge Times
The test measures the paper leading edge arrival time (in microseconds) at each paper path
sensor. An out of range value could indicate slipping rollers or excessive drag. Rollers can slip
due to contamination or loss of pressure. A slipping clutch or drag in previous path segment
could also result in increased transport times.
Table 22 Paper Drive Power / Duplex Drive Power Nominal Values
R# Characteristic Typical Value Result
0 Tray 1/2/3/4 Reports the source tray.
1 Paper Size 0 or 1 Reports the paper size (0/1 -> A/A4).
Tray 4 Source Tray
2 Tray 4 Pick Average Power N/A Reports average power over the Tray 4
pick interval.
3 Tray 4 Transport Average
Power
N/A Reports average of the power over the
Tray 4 to Tray 3 transport interval.
4 Tray 4 - 3 Transport Average
Power
N/A Reports average power over the Tray 4
to deskew transport interval.
Tray 3 Source Tray
2 not used undefined No Tray 3 value.
3 Tray 3 Pick Average Power N/A Reports average power over the Tray 3
pick interval.
4 Tray 3 Transport Average
Power
N/A Reports average power over the Tray 3
to deskew transport interval.
Tray 2 Source Tray
2 not used undefined No Tray 2 value.
3 not used undefined No Tray 2 value.
4 Tray 2 Transport Average
Power
N/A Reports average power over the Tray 2
to deskew transport interval.
Tray 1 Source Tray
2 not used undefined No Tray 1 value.
3 not used undefined No Tray 1 value.
4 Tray 1 Transport Average
Power
N/A Reports average power over the Tray 1
to deskew transport interval.
5 Stage Average Power N/A Reports average of the power over the
stage interval.
6 Transfix Average Power N/A Reports average of the power over the
transfix interval.
7 Exit Average Power N/A Reports average of the power over the
exit interval for all trays for Simplex oper-
ations only.
Duplex Operations Only
7 Duplex Turnaround Average
Power
N/A Reports average of the power over the
duplex turnaround interval for all trays.
8 Duplex Pick Average Power N/A Reports average of the power over the
duplex pick interval.
9 Duplex Stage Average Power N/A Reports average of the power over the
duplex stage interval.
10 Duplex Transfix Average
Power
N/A Reports average of the power over the
duplex transfix interval.
11 Duplex Exit Average Power N/A Reports average of the power over the
duplex exit interval.
Table 23 Simplex / Duplex Paper Leading Edge Times Nominal Values
R# Characteristic Typical Value Result
0 Tray 1/2/3/4 Reports the source tray.
1 Paper Size 0 or 1 Reports the paper size (0/1 -> A/A4).
Tray 4 Source Tray
2 Tray 4 Pick Interval Time N/A Reports the Tray 4 pick interval timing.
3 Tray 4-3 Transport Interval
Time
N/A Reports the Tray 4 to Tray 3 transport
interval timing.
4 Tray 3 Transport Interval Time N/A Reports the Tray 4 transport interval tim-
ing.
Tray 3 Source Tray
2 not used undefined No Tray 3 value.
3 Tray 3 Pick Interval Time N/A Reports the Tray 3 pick interval timing.
4 Tray 3 Transport Interval Time N/A Reports Tray 3 transport interval timing.
Tray 2 Source Tray
2 not used undefined No Tray 2 value.
3 not used undefined No Tray 2 value.
4 Tray 2 Pick Interval Time N/A Reports the Tray 2 pick interval timing.
Tray 1 Source Tray
2 not used undefined No Tray 1 value.
3 not used undefined No Tray 1 value.
4 Tray 1 Pick Interval Time N/A Reports the Tray 1 pick interval timing.
5 Stage Interval Time N/A Reports stage interval timing.
6 Strip Interval Time N/A Reports the strip interval timing.
7 Exit Interval Time N/A Reports the exit interval timing.
Sinplex Operations Only
8 Exited Interval Time N/A Reports the exit clear timing.
Duplex Operations Only
8 Duplex Turnaround Interval
Time
N/A Reports turnaround interval timing.
9 Duplex Pick Interval Time N/A Reports duplex pick interval timing.
Table 22 Paper Drive Power / Duplex Drive Power Nominal Values
R# Characteristic Typical Value Result

Xerox Phaser 8860 Specifications

General

Brand	Xerox
Model	Phaser 8860
Category	All in One Printer
Language	English