YOKOGAWA WT210 User Manual

10-13
IM 760401-01E
GP-IB Interface (Option)
10
10.6 Setting the Output Items
Keys
CHECK RANGE MODE
UPDATE
SCALING
AVG LINE FREQ STORE RECALL HARMONICS KEY LOCK
FILTER
A
B
C
VOLTAGE VOLTAGE
VOLTAGE
AUTO
MODE
CURRENT
AUTO
RANGE
MAX HOLD TRIG
CAL
INTEGRATOR
INTEG SET
SHIFT KEY LOCK
1P 3W 3P 3W
3P 4W
3V 3A
OUTPUT
HARMONICS MEMORY
REMOTE
MEAN
CURRENT RMS
DC
FUNCTION ELEMENT
MAX HOLD
HOLD
ENTER
RESET
WIRING
START STOP
LOCAL SETUP
1
m
V
k
A
V
TIME
ar
deg
h
h
VA
MW
m
VPF
k
A
MW
m
VHz
k
A
MW
23
FUNCTION ELEMENT
123
FUNCTION ELEMENT
123
%
The explanation given in this section uses WT230 as an example. For the differences between
the WT210 and the WT230, see section 2.2, “Operation Keys and Functions/Element Display.”
Procedure
• Operate the instrument by following the thick lines in the menu below.
• Press the ENTER key to confirm a selection or setting.
• To leave the current menu in the middle of the operation, press the key indicated in
step 1. The confirmed settings up to that point are kept.
Setting the Output Item in case of Normal Measurement
10. Sets the A column (output function)
11. Moves to the B column
12. Select from element 1 to 4 (except and )
1.
SHIFT
SETUP
OUTPUT
ENTER
3.
Select communication
(Display C)
Select normal measurement
(Display C)
2.
ENTER
5.
4.
Select output format
(Display C)
ENTER
7.
End of setting
6.
Set the output channel
(Display C)
8.,14.
ENTER
9.
10.
ENTER
15.
End of setting
13.
(Select original setting)
Set the output item
(Display C)
ENTER
*1
A
B
SHIFT
*2
(Select
default
setting)
ENTER
*1 When you press the key at step 13,
the output channel displayed at display B will
change to the next channel, i.e. from ch1 to ch2
and so forth.
*2 Depends on the model number. Refer to the
explanation for more details.

YOKOGAWA WT210 Specifications

General

Brand	YOKOGAWA
Model	WT210
Category	Measuring Instruments
Language	English