14-11
IM 760401-01E
Communication Commands 2 (System of Commands Complying to the IEEE 488.2-1992 Standard)
14
14.3 Commands
14.3.1 Command List
Command Description Page
AOUTput Group
:AOUTput? Queries all settings related to D/A output. 14-15
:AOUTput:CHANnel<x> Sets/queries the D/A output item. 14-15
:AOUTput:IRTime Sets/queries the preset integration time for D/A output of integrated values. 14-15
:AOUTput:PRESet Sets the default value as D/A output items. 14-15
COMMunicateG roup
:COMMunicate? Queries all settings related to communication. 14-16
:COMMunicate:HEADer Sets/queries whether a header is to be added. 14-16
:COMMunicate:LOCKout Sets/cancels local lockout. 14-16
:COMMunicate:REMote Sets remote/local condition. 14-16
:COMMunicate:STATus? Queries the status of a specified circuit. 14-16
:COMMunicate:VERBose Sets/queries the response to be in full or abbreviated form. 14-17
:COMMunicate:WAIT Waits until one of the specified extended event occurs. 14-17
:COMMunicate:WAIT? Generates a response when on of the specified extended events occurs. 14-17
CONFigure Group
:CONFigure? Queries all settings related to the measurement conditions. 14-19
[:CONFigure]:AVERaging? Queries all settings related to the averaging function. 14-19
[:CONFigure]:AVERaging[:STATe] Sets/queries averaging ON/OFF. 14-19
[:CONFigure]:AVERaging:TYPE Sets/queries averaging type and coefficient. 14-19
[:CONFigure]:CFACtor Sets the crest factor or queries the current setting. 14-19
[:CONFigure]:CURRent? Queries all settings related to the current range. 14-19
[:CONFigure]:CURRent:AUTO Sets/queries the current auto range ON/OFF. 14-19
[:CONFigure]:CURRent:ESCaling? Queries all settings related to the external sensor. 14-20
[:CONFigure]:CURRent:ESCaling[:ALL]
Sets the scaling constants for the external sensor for all elements at once. 14-20
[:CONFigure]:CURRent:ESCaling:ELEMent<x>
Sets/queries the scaling constants for the external sensor for each element.14-20
[:CONFigure]:CURRent:RANGe Sets/queries the current range. 14-20
[:CONFigure]:FILTer Sets/queries the frequency filter ON/OFF. 14-20
[:CONFigure]:LFILter Sets/queries the line filter ON/OFF. 14-20
[:CONFigure]:MHold[:STATe] Sets/queries the MAX hold ON/OFF. 14-20
[:CONFigure]:MODE Sets/queries the measurement mode. 14-21
[:CONFigure]:SCALing? Queries all settings related to the scaling function. 14-21
[:CONFigure]:SCALing:{PT|CT|SFACtor}?
Queries all settings related to scaling constants for {voltage|current|power}. 14-21
[:CONFigure]:SCALing:{PT|CT|SFACtor}[:ALL]
Sets the scaling constants for all elements of {voltage|current|power}. 14-21
[:CONFigure]:SCALing:{PT|CT|SFACtor}:ELEMent<x>
Sets the scaling values for each element of {voltage|current|power}. 14-21
[:CONFigure]:SCALing[:STATe] Sets/queries the scaling function ON/OFF. 14-21
[:CONFigure]:SYNChronize Sets/queries the measurement synchronization source. 14-21
[:CONFigure]:VOLTage? Queries all settings related to the voltage range. 14-21
[:CONFigure]:VOLTage:AUTO Sets/queries the voltage auto range ON/OFF. 14-21
[:CONFigure]:VOLTage:RANGe Sets/queries the voltage range. 14-21
[:CONFigure]:WIRing Sets/queries the wiring method. 14-22
To Next Page
Loading...
Need help?
General
