ABB ACS355 series User Manual

22 Introduction to the manual
Contents of this manual
The manual consists of the following chapters:
• Safety (page 17) gives safety instructions you must follow when installing,
commissioning, operating and servicing the drive.
• Introduction to the manual (this chapter, page 21) describes applicability, target
audience, purpose and contents of this manual. It also contains a quick
installation and commissioning flowchart.
• Operation principle and hardware description (page 27) describes the operation
principle, layout, power connections and control interfaces, type designation label
and type designation information in short.
• Mechanical installation (page 33) tells how to check the installation site, unpack,
check the delivery and install the drive mechanically.
• Planning the electrical installation (page 39) tells how to check the compatibility of
the motor and the drive and select cables, protections and cable routing.
• Electrical installation (page 49) tells how to check the insulation of the assembly
and the compatibility with IT (ungrounded) and corner-grounded TN systems as
well as connect power cables and control cables.
• Installation checklist (page 59) contains a checklist for checking the mechanical
and electrical installation of the drive.
• Start-up, control with I/O and ID run (page 61) tells how to start up the drive as
well as how to start, stop, change the direction of the motor rotation and adjust the
motor speed through the I/O interface.
• Control panels (page 75) describes the control panel keys, LED indicators and
display fields and tells how to use the panel for control, monitoring and changing
the settings.
• Application macros (page 107) gives a brief description of each application macro
together with a wiring diagram showing the default control connections. It also
explains how to save a user macro and how to recall it.
• Program features (page 121) describes program features with lists of related user
settings, actual signals, and fault and alarm messages.
• Actual signals and parameters (page 179) describes actual signals and
parameters. It also lists the default values for the different macros.
• Fieldbus control with embedded fieldbus (page 313) tells how the drive can be
controlled by external devices over a communication network using embedded
fieldbus.
• Fieldbus control with fieldbus adapter (page 339) tells how the drive can be
controlled by external devices over a communication network using a fieldbus
adapter.
• Fault tracing (page 349) tells how to reset faults and view fault history. It lists all
alarm and fault messages including the possible cause and corrective actions.
• Maintenance and hardware diagnostics (page 369) contains preventive

ABB ACS355 series Specifications

General

Brand	ABB
Model	ACS355 series
Category	Controller
Language	English