ABB ACS355 series User Manual

Actual signals and parameters 293
55 FBA DATA OUT Data from the fieldbus controller to the drive through a
fieldbus adapter. See chapter Fieldbus control with fieldbus
adapter on page 339.
Note: In adapter module the parameter group number is 2.
5501 FBA DATA
OUT 1
Selects data to be transferred from the fieldbus controller to
the drive.
0 Not in use
1…6 Control and status data words
101…9999 Drive parameter
5502 FBA DATA
OUT 2
See 5501 FBA DATA OUT 1.
…… …
5510 FBA DATA
OUT 10
See 5501 FBA DATA OUT 1.
84 SEQUENCE
PROG
Sequence programming. See section Sequence
programming on page 169.
8401 SEQ PROG
ENABLE
Enables Sequence programming.
If Sequence programming enable signal is lost, the
Sequence programming is stopped, Sequence
programming state (0168 SEQ PROG STATE) is set to 1
and all timers and outputs (RO/TO/AO) are set to zero.
DISABLE
D
DISABLED Disabled 0
EXT2 Enabled in external control location 2 (EXT2) 1
EXT1 Enabled in external control location 1 (EXT1) 2
EXT1&EXT2 Enabled in external control locations 1 and 2 (EXT1 and
EXT2)
3
ALWAYS Enabled in external control locations 1 and 2 (EXT1 and
EXT2) and in local control (LOCAL)
4
All parameters
No. Name/Value Description Def/FbEq
5501 setting Data word
1 Control word
2REF1
3REF2
4Status word
5 Actual value 1
6 Actual value 2

ABB ACS355 series Specifications

General

Brand	ABB
Model	ACS355 series
Category	Controller
Language	English