ABB ACS355 series User Manual

Program features 149
Settings
Parameters 3013 UNDERLOAD FUNC, 3014 UNDERLOAD TIME and 3015
UNDERLOAD CURVE
 Earth fault protection
The Earth fault protection detects earth faults in the motor or motor cable. The
protection can be selected to be active during start and run or during start only.
An earth fault in the input power line does not activate the protection.
Settings
Parameter 3017 EARTH FAULT
 Incorrect wiring
Defines the operation when incorrect input power cable connection is detected.
Settings
Parameter 3023 WIRING FAULT
 Input phase loss
Input phase loss protection circuits supervise the input power cable connection status
by detecting intermediate circuit ripple. If a phase is lost, the ripple increases.
Settings
Parameter 3016 SUPPLY PHASE
Pre-programmed faults
 Overcurrent
The overcurrent trip limit for the drive is 325% of the drive nominal current.
 DC overvoltage
The DC overvoltage trip limit is 420 V (for 200 V drives) and 840 V (for 400 V drives).
 DC undervoltage
The DC undervoltage trip limit is adaptive. See parameter 2006 UNDERVOLT CTRL.
 Drive temperature
The drive supervises the IGBT temperature. There are two supervision limits: Alarm
limit and fault trip limit.

ABB ACS355 series Specifications

General

Brand	ABB
Model	ACS355 series
Category	Controller
Language	English