228 PROFIsafe
Installation
Installation procedure:
1. Install the FSO safety functions module to the drive, see chapters Planning for
installation and Installation and the drive hardware manual.
2. Install the FB module to the drive. See the appropriate manual:
• FENA-01/-11/-21 Ethernet adapter module user’s manual
(3AUA0000093568 [English]), or
• FPNO-21 PROFINET adapter module user's manual
(3AXD50000158614 [English]).
3. Connect the FB module to the safety PLC through a PROFINET network. See the
manual of the module, and the manual of the safety PLC.
To Next Page
Loading...
Need help?
General
