104 Rockwell Automation Publication 2711P-UM007D-EN-P - December 2015
Chapter 4 Windows Operating System
Web Server Configuration
The web server tab in the Network Server Configuration application
configures settings that are used for HTTP web activities. These settings are
standard Microsoft Windows CE parameters.
TIP To apply new settings, click OK in the title bar of the dialog box. You are
asked if you want to restart the service immediately.
Table 26 - Web server Parameters
Parameter Description Default
Admin Users Specifies a list of users who are allowed to administer web
activities.
When selected, enter a list of user names, which are
separated by semicolons, in the field that opens at the
bottom of the dialog box.
ADMIN
Basic Authentication To require a user name and password to access the web
server, check this option.
Disabled (unchecked)
Default Web Page Specifies default web pages that you can access. default.htm; index.htm
Allow Directory Browsing To browse directories on a web server, check this option. Disabled (unchecked)
Max Connections Specifies the maximum number of incoming web
connections.
256
Log File Directory Specifies the path where the log file is stored. This file logs
web activity.
\windows\www
Max Log Size Specifies the maximum size of the log file that is stored in
the log file directory.
A new log file is created, when the current log file reaches
its maximum size.
32768 bytes
NTLM Authentication To require a valid user name and password to access the
web server, check this option.
If NTLM Authentication is enabled, you must enter a valid
user name in the Admin Users field.
NTLM user accounts are defined in the User Account
Manager of the control panel.
Enabled (checked)
To Next Page
Loading...
Need help?
General
