Rockwell Automation Publication 2711P-UM007D-EN-P - December 2015 9
Preface
This manual describes how to install, configure, operate, and troubleshoot the
PanelView™ Plus 7 Standard terminals. It does not provide procedures on how
to create applications that run on the terminals or ladder logic that runs in the
controller.
Other tasks to perform include:
• Create a human machine interface (HMI) application for the terminal
by using FactoryTalk® View Machine Edition (ME) software, version 7.0
or later.
• Create ladder logic for the controller by using the Studio 5000 Logix
Designer® application.
Additional Resources
These documents contain additional information concerning related products
from Rockwell Automation.
You can view or download publications at
http://www.rockwellautomation.com/global/literature-library/overview.page
.
To order paper copies of technical documentation, contact your local
Allen-Bradley distributor or Rockwell Automation sales representative.
Package Contents
This product is shipped with the following items:
• PanelView Plus 7 Standard terminal with FactoryTalk View ME Station
runtime software installed and activated
• Mounting levers for panel installation
• Removable power terminal block
• Secure Digital (SD) card cover
• Product information
• Cutout template
•China RoHS information
• Product Feature Notice
Resource Description
PanelView Plus 7 Standard Terminals Technical Data,
publication 2711P-TD008
Provides technical specifications, environmental specifications, and certifications for the PanelView Plus 7 Standard
terminals.
Industrial Automation Wiring and Grounding Guidelines,
publication 1770-4.1
Provides general guidelines for installing a Rockwell Automation industrial system.
EtherNet/IP Embedded Switch Technology Application
Guide, publication ENET-AP005
Provides information on how to install, configure, and maintain linear and Device Level Ring (DLR) networks using
Rockwell Automation® EtherNet/IP devices with embedded switch technology.
Safety Guidelines for the Application, Installation, and
Maintenance of Solid-State Controls, publication SGI-1.1
Provides general guidelines for the application, installation, and maintenance of solid-state control in the form of
individual devices or packaged assemblies that use solid-state components.
Guidelines for Handling Lithium Batteries Technical Data,
publication AG-5.4
Provides guidelines to store, handle, install, and dispose of lithium batteries.
Product Certifications website,
http://www.rockwellautomation.com/global/certification/
overview.page
Provides declarations of conformity, certificates, and other certification details.
To Next Page
Loading...
Need help?
General
