67
www.amcelettronica.com
KX series v.1.70
EVENTS MENU
The control unit saves each system operation and occurrence.
The system can save 1000 events with a rotating update system. Once the log capacity is full, the system will delete the oldest event
to make space for new ones. In order to make reading easier, 2 systems were adopted:
- traditional reading: Traditional reading consists of entering the event menu and reading them.
- notification system: You can also group them by type of event to make searching and reading easier:
Fig1 Reading menu for all events
Fig 2 Reading menu for only unread events
Fig 3 Reading menu for only alarm events
Fig 4 Reading menu for events connected to operating
errors
Fig 5 Reading menu for system arming and disarming
events
Fig 6 Reading menu for user accesses
fig 1
fig 3
fig 4
fig 2
fig 5
fig 6
The notification system is comprised of signalling individual alarms and errors from the control unit through the red LED using
quick access. When the red LED on the keypad turns on, the control unit is notifying you that there is an event to read. Pressing the
CANCEL key accesses the notification screen. In the figure, the system shows that there are 3 notifications to read. They can be
read after inserting an enabled code.
Fig 1 the system shows 3 notifications
Fig 2 When the code is entered, the system shows the notifica-
tions in chronological order. You can scroll through the log using
the up arrow key.
Fig 3 When they have been read the red LED will turn off and the
message in the figure will appear
fig 3
fig 2
fig 1
To Next Page
Loading...
Need help?
General