47
1.8 7 7. 8 7 7. 2 2 69 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 7 7.8 7 7.2269
CHAPTER 2: OVERVIEW
RECORDING FUNCTION
All messages shown in the Syslog are equipped with various recording functions.
To store messages shown in the Syslog (filtered or unfiltered), press the Save trace button. The messages will be stored in a .txt file.
To remove messages shown in the Syslog, press the Clear trace button.
To stop recording messages, press the Pause button. To continue, press the button again.
2.10 SNMP
The SNMP function allows all function-critical and safety-critical elements of the matrix to be monitored and queried.
This function complies with the RFC 1157 standard.
NOTE: When using SNMP monitoring, we recommend using a dedicated network to maintain continuous access.
You have the following options to configure the SNMP monitoring:
OSD
OSD
To activate the SNMP agent, proceed as follows:
1. Select Configuration > SNMP in the main menu.
To Next Page
Loading...
Need help?
General
