6
1.8 7 7. 8 7 7. 2 2 69 BLACKBOX.COM
NEED HELP?
LE AVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 7 7.8 7 7.2269
SAFETY INSTRUCTIONS
To ensure reliable and safe long-term operation of your Modular KVM Matrix Switch, note the following guidelines.
INSTALLATION
Only use the device according to this User Manual. Failure to follow these procedures could result in damage to the equipment
or injury to the user or installer.
Only use in dry, indoor environments.
The Modular KVM Matrix Switch and the power supply units can get warm. Do not install components in an enclosed space without
any airflow.
Do not obscure ventilation holes.
Only use power supplies originally supplied with the product or manufacturer-approved replacements. Do not use a power supply
if it appears to be defective or has a damaged chassis.
Connect all power supplies to grounded outlets. In each case, ensure that the ground connection is maintained from the outlet
socket through to the power supply’s AC power input.
In case the device is equipped with one or more grounding screws, be sure to use these for normal operation to ensure the
grounding of the chassis.
Do not connect the link interface to any other equipment, particularly network or telecommunications equipment.
Only connect devices to the serial interface that are protected against short circuit currents and incorrect voltages at the serial
interface.
To disconnect the Modular KVM Matrix Switch from the power supply, remove the power cord cables of all power supply units
or switch supplies off.
Take any required ESD precautions.
To disconnect the device completely from the electric circuit, all power cables have to be removed.
REPAIR
Do not attempt to open or repair a power supply unit.
Do not attempt to open or repair the Modular KVM Matrix Switch. There are no user serviceable parts inside.
Contact Black Box Technical Support at 877-877-2269 or info@blackbox.com if there is a fault.
To Next Page
Loading...
Need help?
General
