Canon LASER SHOT LBP3500 User Manual

3-2
Introduction
Setting Up the Printing Environment
3
Introduction
After Installing the Printer
The following shows the tasks that should be performed after installing the printer:
■ Installing the printer driver
The printer driver is software required for printing from an application you use. Specify the
print settings in the printer driver. The procedure for installing the printer driver varies
depending on the system environment.
•
When printing with the printer and computer connected with the USB cable (See p. 3-4)
•
When printing with the optional network board installed, and the printer and the
computer connected by LAN (See Network Guide)
■ Sharing the printer on a network (See p. 3-52)
If you share this printer on a network and use it from a computer on the network, you must
specify the settings for the computer and install the printer driver on the client computers.
Tasks to Perform Each Time You Print
The following shows the tasks that should be performed each time you print:
■ Specifying printing preferences
Specify the paper size, document size, and print copies in the printer driver. If you do not
specify these printing preferences properly, you may not be able to obtain expected
printout results.
■ Performing printing
Select the print menu from the application. This procedure varies depending on the
application you are using. See the instruction manual supplied with the application.
System Requirements
The following system environment is required to use the printer driver:
■ Operating system software
•
Microsoft Windows 98
•
Microsoft Windows Me
•
Microsoft Windows 2000 Server/Professional

Canon LASER SHOT LBP3500 Specifications

General

Print Technology	Laser
Print Speed	25 ppm (A4)
Connectivity	USB 2.0
Memory	8 MB
Duplex Printing	Manual
Weight	11.2 kg
Paper Capacity	250 sheets
Media Size	A4, Letter, Legal, Executive
Print Resolution	600 x 600 dpi