4-90
Printing a Document
Printer Status Window
4
■ [Cassettes Settings]
Allows you to specify which paper cassette is to be used if [Paper Source] in the [Paper
Source] sheet is set to [Auto] (when the paper source is selected automatically) and the
paper feed direction of custom size paper (the loading orientation) when printing custom
paper from the paper cassette. For more details, see "Selecting a Paper Source," on p.
2-13 and "When Loading Custom Size Paper," on p. 2-34.
■ [Network Settings] (Only when the network board is installed)
If you are using Windows XP Service Pack 2 or another operating system equipped with
Windows Firewall, and the network settings for the printer is not specified, the printer may
not be detected when installing the software for the network environment. In this case,
connect the printer and computer with the USB cable, install the printer driver, and then
specify the network settings in this dialog box in advance. For more details, see "Network
Guide".
[Refresh]
Selecting [Refresh] from the [Options] menu obtains the latest printer status and
refreshes the Printer Status Window display.
You can obtain the same result by clicking [ ] (Refresh) in the Printer Status
Window.
[Resolve Error]
When a job is paused for some reason, you can resume the job by selecting
[Resolve Error] from the [Job] menu. Resuming a job by selecting [Resolve Error]
may cause unexpected print results. [Resolve Error] is disabled in any of the
following cases:
• When the job is paused due to a printer error such as a paper jam and paper-out
condition
• When another user's job is paused ([Resolve Error] is enabled on the print server
if the printer is shared on a network)
You can obtain the same result by clicking [ ] (Resolve Error) in the Printer
Status Window.
IMPORTANT
If the message <Insufficient Disk Space> is displayed, delete unnecessary files, then
select [Resolve Error].
To Next Page
Loading...
Need help?
General
