Loading Paper in a Paper Cassette
2-34
Loading and Outputting Paper
2
6
Set the paper cassette in the printer at an angle as shown in
the figure
aa
aa
, then push it into the printer or the paper feeder
gently and horizontally
bb
bb
.
Push the paper cassette into the printer firmly until the front side of the paper
cassette is flush with the front surface of the printer.
CAUTION
When setting the paper cassette in the printer, be careful not to catch your
fingers.
Next, configure the printer driver (See p. 2-65).
When Loading Custom Size Paper
Perform the following procedure to load custom size paper.
IMPORTANT
•
You can load paper of the following custom paper sizes.
-When loading paper in portrait orientation: Width 210.0 to 297.0 mm; Length 210.0 to
431.8 mm*
*When loading paper that is 279.5 to 297.0 mm wide in Cassette 1, the paper length should be 210.0 to
420.0 mm.
-When loading paper in landscape orientation: Width 210.0 to 297.0 mm; Length 148.0
to 297.0 mm
Cassette 1 Cassette 2
b
a
b
a
To Next Page
Loading...
Need help?
General
