1-14
Before You Start
1
Connecting to a Computer
Connecting to a Computer
This section describes how to connect the printer to a computer and network.
As this printer is equipped with a USB connector, you can use a USB cable to
connect to a computer. By installing the optional network board, the printer can be
connected directly to the network using a LAN cable.
Using a USB Cable
Connect the printer to a computer equipped with a USB port using a USB cable.
WARNING
When plugging or unplugging the USB cable when the power plug is plugged in
an AC power outlet, do not touch the metal part of the connector, as this may
result in electrical shock.
IMPORTANT
•
Do not plug or unplug the USB cable while the computer and printer are ON, as this may
result in damage to the printer.
•
This printer uses bi-directional communication. Operation of the printer when connected
via unidirectional communication equipment has not been tested, and as a result, Canon
cannot guarantee printer operation when the printer is connected using unidirectional
print servers, USB hubs or switching devices.
NOTE
•
The appropriate USB interface varies depending on the operating system of the
connected computer as follows. For more details, contact your local authorized Canon
dealer.
-Windows 98/Me: USB Full-Speed (USB1.1 equivalent)
-Windows 2000/XP/Server 2003: USB 2.0 Hi-Speed/USB Full-Speed (USB1.1
equivalent)
•
When you connect this printer to a computer with a USB cable, use a computer with
manufacturer's guarantee of USB proper operation.
•
A USB cable is only supplied with the printers for China. In other countries and regions,
prepare according to the specifications of your computer. Use a USB cable with the
following symbol.
To Next Page
Loading...
Need help?
General
