6-20
Optional Accessories
6
Paper Feeder
9
Connect the interface cables except for the USB cable, and
connect the power cord.
10
Plug the power plug into the AC power outlet.
11
Connect the USB cable.
IMPORTANT
Be sure to turn the printer ON once when loading paper in the paper cassette for
the first time after installing the paper feeder.
NOTE
After installing the paper feeder, you have to specify the settings for the optional
accessories in the [Configuration]/[Device Settings] sheet in the printer driver. You
can obtain the status of the optional accessories automatically by clicking [Get
Device Status] in the [Configuration]/[Device Settings] sheet.
Removing the Paper Feeder
Remove the paper feeder using the following procedure.
WARNING
Be sure to turn the printer and computer OFF, unplug the power plug, and then
disconnect all the interface cables and power cord from the printer before
removing the paper feeder. Otherwise, the power cord or interface cables may
be damaged, resulting in a fire or electrical shock.
CAUTION
• Do not carry the printer with the paper cassette attached. If you do so, the paper
cassette may drop resulting in personal injury.
To Next Page
Loading...
Need help?
General
