PurposeCommand or Action
Example:
RP/0/RSP0/CPU0:router# show bgp update-group
0.0
Process ID range is from 0 to 254. Index range is from 0 to
4294967295.
•
The summary keyword displays summary information for
neighbors in a particular update group.
•
If no argument is specified, this command displays information
for all update groups (for the specified address family).
•
The performance-statistics keyword displays performance
statistics for an update group.
Configuring BGP Nonstop Routing
SUMMARY STEPS
1.
configure
2.
router bgp as-number
3.
nsr
4.
commit
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Specifies the BGP AS number, and enters the BGP
configuration mode, for configuring BGP routing
processes.
router bgp as-number
Example:
RP/0/RSP0/CPU0:router(config)# router bgp
120
Step 2
Activates BGP Nonstop routing.nsr
Step 3
Example:
RP/0/RSP0/CPU0:router(config-bgp)# nsr
BGP supports 5000 NSR
sessions.
Note
commit
Step 4
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
OL-30423-03 135
Implementing BGP
Configuring BGP Nonstop Routing
To Next Page
Loading...
Need help?
General
