Cisco A9K-SIP-700 Configuration Guide

Example:
RP/0/RSP0/CPU0:router(config-rpl)# end
or
RP/0/RSP0/CPU0:router(config-rpl)# commit
Saves configuration changes.
•
When you issue the end command, the system prompts you to commit changes:
Uncommitted changes found, commit them before exiting(yes/no/cancel)?[cancel]:
◦
Entering yes saves configuration changes to the running configuration file, exits the configuration session,
and returns the router to EXEC mode.
◦
Entering no exits the configuration session and returns the router to EXEC mode without committing the
configuration changes.
◦
Entering cancel leaves the router in the current configuration session without exiting or committing the
configuration changes.
•
Use the commit command to save the configuration changes to the running configuration file and remain within
the configuration session.
VRF Neighbor Configuration Mode
The following example shows how to enter VRF neighbor configuration mode:
RP/0/RSP0/CPU0:router(config)# router bgp 140
RP/0/RSP0/CPU0:router(config-bgp)# vrf vrf_A
RP/0/RSP0/CPU0:router(config-bgp-vrf)# neighbor 11.0.1.2
RP/0/RSP0/CPU0:router(config-bgp-vrf-nbr)#
VRF Neighbor Address Family Configuration Mode
The following example shows how to enter VRF neighbor address family configuration mode:
RP/0/RSP0/CPU0:router(config)# router bgp 112
RP/0/RSP0/CPU0:router(config-bgp)# vrf vrf_A
RP/0/RSP0/CPU0:router(config-bgp-vrf)# neighbor 11.0.1.2
RP/0/RSP0/CPU0:router(config-bgp-vrf-nbr)# address-family ipv4 unicast
RP/0/RSP0/CPU0:router(config-bgp-vrf-nbr-af)#
VPNv4 Address Family Configuration Mode
The following example shows how to enter VPNv4 address family configuration mode:
RP/0/RSP0/CPU0:router(config)# router bgp 152
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
OL-30423-03 19
Implementing BGP
BGP Configuration

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English