Cisco A9K-SIP-700 Configuration Guide

PurposeCommand or Action
Configures the time BGP waits for a response after
sending a serial or reset query. Set response-time
Use one these commands.
Step 10
•
response-time time
in seconds. Range for the response time is 15 to
3600 seconds.
•
response-time off
Configure the off option to wait indefinitely for a
response.
Example:
RP/0/RSP0/CPU0:router(config-bgp-rpki-server)#response-time
30
Or
RP/0/RSP0/CPU0:router(config-bgp-rpki-server)#response-time
off
commit
Step 11
(Optional)
Configures shut down of the RPKI cache.
shutdown
Example:
RP/0/RSP0/CPU0:router(config-bgp-rpki-server)#shutdown
Step 12
Configuring RPKI Prefix Validation
Perform this task to control the behavior of RPKI prefix validation processing.
•
SUMMARY STEPS
1.
configure
2.
router bgp as-number
3.
Use one of these commands.
•
bgp origin-as validation disable
•
bgp origin-as validation time {off | prefix_validation_time
4.
bgp origin-as validation signal ibgp
5.
commit
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
OL-30423-03 67
Implementing BGP
BGP Prefix Origin Validation Based on RPKI

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English