Cisco A9K-SIP-700 Configuration Guide

PurposeCommand or Action
Specifies the address family as VPNv4 or VPNv6 and
enters neighbor address family configuration mode.
address-family {vpnv4 unicast | vpnv6 unicast}
Example:
RP/0/RSP0/CPU0:router(config-bgp-nbr)#address-family
vpnv6 unicast
Step 6
Enables handling of self-originated VPN routes
containing Accept_Own community.
accept-own [inheritance-disable]
Example:
RP/0/RSP0/CPU0:router(config-bgp-nbr-af)#accept-own
Step 7
Use the inheritance-disable keyword to disable the
"accept own" configuration and to prevent inheritance
of "acceptown" from a parent configuration.
Configuring BGP Link-State
Configuring BGP Link-state
To exchange BGP link-state (LS) information with a BGP neighbor, perform these steps:
SUMMARY STEPS
1.
configure
2.
router bgp as-number
3.
neighbor ip-address
4.
remote-as as-number
5.
address-family link-state link-state
6.
commit
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Specifies the BGP AS number and enters the BGP
configuration mode, allowing you to configure the BGP
routing process.
router bgp as-number
Example:
RP/0/RSP0/CPU0:router(config)# router bgp 100
Step 2
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
OL-30423-03 143
Implementing BGP
Configuring BGP Link-State

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English