Additional References
The following sections provide references related to implementing IS-IS.
Related Documents
Document TitleRelated Topic
Cisco ASR 9000 Series Aggregation Services Router
Routing Command Reference
IS-IS commands: complete command syntax,
command modes, command history, defaults, usage
guidelines, and examples
Implementing MPLS Traffic Engineering on Cisco
ASR 9000 Series Router module in Cisco ASR 9000
Series Aggregation Services Router MPLS
Configuration Guide
MPLS TE feature information
Intermediate System-to-Intermediate System (IS-IS)
TLVs at: http://www.cisco.com/en/US/tech/tk365/
technologies_tech_note09186a0080094bbd.shtml
IS-IS TLVs
Cisco ASR 9000 Series Aggregation Services Router
Interface and Hardware Component Configuration
Guide and Cisco ASR 9000 Series Aggregation
Services Router Interface and Hardware Component
Command Reference
Bidirectional Forwarding Detection (BFD)
Standards
TitleStandards
Routing IPv6 with IS-IS, by Christian E. Hopps
Draft-ietf-isis-ipv6-05.txt
M-ISIS: Multi Topology (MT) Routing in IS-IS, by
Tony Przygienda, Naiming Shen, and Nischal Sheth
Draft-ietf-isis-wg-multi-topology-06.txt
IS-IS Extensions for Traffic Engineering, by Henk
Smit and Toni Li
Draft-ietf-isis-traffic-05.txt
Restart Signaling for IS-IS, by M. Shand and Les
Ginsberg
Draft-ietf-isis-restart-04.txt
Point-to-point operation over LAN in link-state
routing protocols, by Naiming Shen
Draft-ietf-isis-igp-p2p-over-lan-05.txt
IP Fast Reroute Framework, by M. Shand and S.
Bryant
Draft-ietf-rtgwg-ipfrr-framework-06.txt
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
328 OL-30423-03
Implementing IS-IS
Additional References