Cisco A9K-SIP-700 Configuration Guide

PurposeCommand or Action
Enables IPv6 checksum support on the interface. To
disable, use the disable keyword.
ipv6 checksum [disable]
Example:
RP/0/RSP0/CPU0:router(config-bfd-if)# ipv6
checksum
Step 4
commit
Step 5
Clearing and Displaying BFD Counters
The following procedure describes how to display and clear BFD packet counters. You can clear packet
counters for BFD sessions that are hosted on a specific node or on a specific interface.
SUMMARY STEPS
1.
show bfd counters[ ipv4 | all] packet interface type interface-path-id] location node-id
2.
clear bfd counters [ ipv4 | ipv6 |all] packet [interface type interface-path-id] location node-id
3.
show bfd counters [ [ipv4 | ipv6 | all] packet [interface type interface-path-id] location node-id
DETAILED STEPS
PurposeCommand or Action
Displays the BFD counters for IPv4 packets, IPv6
packets, or all packets.
show bfd counters[ ipv4 | all] packet interface type
interface-path-id] location node-id
Example:
RP/0/RSP0/CPU0:router#show bfd counters all packet location
0/3/cpu0
Step 1
Clears the BFD counters for IPv4 packets, IPv6
packets, or all packets.
clear bfd counters [ ipv4 | ipv6 |all] packet [interface type
interface-path-id] location node-id
Example:
RP/0/RSP0/CPU0:router# clear bfd counters all packet
location 0/3/cpu0
Step 2
Verifies that the BFD counters for IPv4 packets,
IPv6 packets, or all packets have been cleared.
show bfd counters [ [ipv4 | ipv6 | all] packet [interface type
interface-path-id] location node-id
Example:
RP/0/RSP0/CPU0:router# show bfd counters all packet
location 0/3/cpu0
Step 3
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
218 OL-30423-03
Implementing BFD
Clearing and Displaying BFD Counters

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English