D-Link xStack DES-3200 Series Reference Guide

xStack® DES-3200 Series Layer 2 Managed Fast Ethernet Switch
269
destination. If the packet fails to find the IP address in this specified time, the Ping
packet will be dropped.
Click the Start button to initiate the Ping Test.
After clicking the Start button, the following page will appear:
Figure 11-18 Ping Test Result window
Click the Stop button to halt the Ping Test.
Click the Resume button to resume the Ping Test.
Trace Route
The trace route page allows the user to trace a route between the switch and a given host on the network.
To view this window, click Monitoring > Trace Route as shown below:
Figure 11-19 Trace Route window
The fields that can be configured are described below:
Parameter Description
IPv4 Address
IP address of the destination station.
IPv6 Address
IPv6 address of the destination station.
TTL (1-60)
The time to live value of the trace route request. This is the maximum number of
routers that a trace route packet can pass. The trace route option will cross while
seeking the network path between two devices.
The range for the TTL is 1 to 60 hops.

D-Link xStack DES-3200 Series Specifications

General

Brand	D-Link
Model	xStack DES-3200 Series
Category	Network Router
Language	English