D-Link xStack DGS-3426G User Manual

xStack
®
DGS-3426G Layer 2 Gigabit Ethernet Managed Switch
240
TxPeriod(1-65535)
This sets the TxPeriod of time for the authenticator PAE state machine. This value determines
the period of an EAP Request/Identity packet transmitted to the client. The default setting is 30
seconds.
QuietPeriod(0-
65535)
This allows the user to set the number of seconds that the Switch remains in the quiet state
following a failed authentication exchange with the client. The default setting is 60 seconds.
SuppTimeout(1-
65535)
This value determines timeout conditions in the exchanges between the Authenticator and the
client. The default setting is 30 seconds.
ServerTimeout(1-
65535)
This value determines timeout conditions in the exchanges between the Authenticator and the
authentication server. The default setting is 30 seconds.
MaxReq(1-10)
The maximum number of times that the Switch will retransmit an EAP Request to the client
before it times out of the authentication sessions. The default setting is 2.
ReAuthPeriod(1-
65535)
A constant that defines a nonzero number of seconds between periodic reauthentication of the
client. The default setting is 3600 seconds.
MaxUser(1-128)
The maximum number of users for each port that can be learned via 802.1X authentication.
ReAuth
Determines whether regular reauthentication will take place on this port. The default setting is
Disabled.
Forward EAPOL
PDU
This enables or disables the Switch retransmit EAPOL PDU Request on a per port basis.
Capability
This allows the 802.1X Authenticator settings to be applied on a per-port basis. Select
Authenticator to apply the settings to the port. When the setting is activated, a user must pass
the authentication process to gain access to the network. Select None disable 802.1X functions
on the port.
Click Apply to implement your configuration changes. To view configurations for the 802.1X Authenticator Settings on a port-
by-port basis, see the 802.1X Authenticator Settings table.
802.1X User
This window allows the user to set different local users on the Switch and set a global limitation on the maximum number of users
that can be learned via 802.1X authentication.
To view this window, click Security > 802.1X > 802.1X User, as shown below:

D-Link xStack DGS-3426G Specifications

General

Brand	D-Link
Model	xStack DGS-3426G
Category	Network Router
Language	English