D-Link xStack DGS-3426G User Manual

xStack
®
DGS-3426G Layer 2 Gigabit Ethernet Managed Switch
287
Figure 6 - 75 JWAC User Accounts window
To add another JWAC user account to the Switch, click the Add button, to clear all the existing entries, click the Clear All button.
To modify a JWAC user account, click the corresponding Modify button, which will open the following window:
Figure 6 - 76 JWAC User Account Modify Table window
The following fields can be configured:
Parameter Description
VID(1-4094)
Enter the VLAN ID of the Account you wish to create.
Old Password
Enter the original password of the user. This field is case-sensitive and must be a complete
alphanumeric string.
New Password
Enter a new password of the user. This field is case-sensitive and must be a complete
alphanumeric string.
Confirm New
Password
Retype the new password entered in the previous field.
Click Apply to implement changes made.
JWAC Host Information
The JWAC Host information Table allows the user to show or delete the hosts, which are handling or have been handled by the
switch.
To view the following window, click Security > JWAC > JWAC Host Information, as shown below:

D-Link xStack DGS-3426G Specifications

General

Brand	D-Link
Model	xStack DGS-3426G
Category	Network Router
Language	English