D-Link xStack DGS-3426G User Manual

xStack
®
DGS-3426G Layer 2 Gigabit Ethernet Managed Switch
244
Authentic RADIUS Server
The RADIUS feature of the Switch allows the user to facilitate centralized user administration as well as providing protection
against a sniffing, active hacker. The Web Manager offers three windows.
To view this window, click Security > 802.1X > Authentic RADIUS Server, as shown below:
Figure 6 - 27 Authentic RADIUS Server window
This window displays the following information:
Parameter Description
Succession
Choose the desired RADIUS server to configure: First, Second or Third.
RADIUS Server
Set the RADIUS server IP.
Authentic Port
Set the RADIUS authentic server(s) UDP port. The default port is 1812.
Accounting Port
Set the RADIUS account server(s) UDP port. Tick Default to use the default UDP port in
the Accounting Port. The default port is 1813.
Key
Set the key the same as that of the RADIUS server.
Confirm Key
Confirm the shared key is the same as that of the RADIUS server.
Timeout(1-255)
Enter the timeout value in seconds (1 to 255). Tick Default to use the default time. The
default value is 5.
Retransmit(1-20)
Set the count for retransmit(1 to 20). Tick Default to use the default re-transmit value. The
default value is 2.
Status
This allows the user to set the RADIUS Server as Valid (Enabled) or Invalid (Disabled).
Click Apply to implement changes made.

D-Link xStack DGS-3426G Specifications

General

Brand	D-Link
Model	xStack DGS-3426G
Category	Network Router
Language	English