D-Link xStack DGS-3426G User Manual

xStack
®
DGS-3426G Layer 2 Gigabit Ethernet Managed Switch
276
SSH User Authentication Mode
The following windows are used to configure parameters for users attempting to access the Switch through SSH.
To view this window, click Security > SSH > SSH User Authentication Mode, as shown below:
Figure 6 - 62 Current Accounts window
In the example screen above, the User Account “RG” has been previously set using the User Accounts window in the
Administration folder. A User Account must be set in order to set the parameters for the SSH user. To configure the parameters
for a SSH user, click on the hyperlinked User Name in the Current Accounts window, which will reveal the following window
to configure.
NOTE: To set the SSH
User Authentication
parameters on the
Switch, a User
Account must be
previously configured.
Figure 6 - 63 SSH User menu
Once a User Account has been configured, return to the SSH User Authentication window, which now displays the newly created
account, as shown here.
Figure 6 - 64 SSH User Authentication Mode window
To configure the SSH settings for this user, click its hyperlinked User Name which will display the following window to
configure:
Figure 6 - 65 SSH User Authentication Mode – Edit window
The user may set the following parameters:

D-Link xStack DGS-3426G Specifications

General

Brand	D-Link
Model	xStack DGS-3426G
Category	Network Router
Language	English