D-Link xStack DGS-3426G User Manual

xStack
®
DGS-3426G Layer 2 Gigabit Ethernet Managed Switch
250
Figure 6 - 32 WAC User Account – Edit window
The following parameters can be configured:
Parameter Description
User Name
Enter a user name for the new account.
Password
Enter the password for the user. This field is case-sensitive and must be a complete
alphanumeric string.
Confirmation
Confirm the new password entered above. Entering a different password here from the one
set above will result in a fail message.
VLAN Name
Enter a VLAN to be associated with the WAC account.
VID(1-4094)
Enter the VLAN ID to be associated with the WAC account.
Click Apply to implement changes made.
WAC Host Table Settings
This window is used to enable and configure Web-based Access Control Host Table Settings on the Switch.
To view this window, click Security > Web Authentication > WAC Host Table Settings, as shown below:

D-Link xStack DGS-3426G Specifications

General

Brand	D-Link
Model	xStack DGS-3426G
Category	Network Router
Language	English