EasyManuals Logo
Home>Dell>Storage>POWERVAULT MD3600F

Dell POWERVAULT MD3600F User Manual

Dell POWERVAULT MD3600F
318 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #145 background imageLoading...
Page #145 background image
Configuration: Premium Feature—Snapshot Virtual Disks 145
10
Configuration: Premium Feature—
Snapshot Virtual Disks
NOTE: If you ordered this feature, you received a Premium Feature Activation card
shipped in the same box as your Dell PowerVault MD storage array. Follow the
directions on the card to obtain a key file and to enable the feature.
NOTE: The snapshot feature allows up to 16 snapshots per LUN and 256 per array
to be present at the same time.
A snapshot virtual disk is a point-in-time image of a virtual disk in a storage
array. It is not an actual virtual disk containing a copy of the original data; It is
a reference to the data that was contained on a virtual disk at a specific time.
A snapshot virtual disk is the logical equivalent of a complete physical copy.
However, you can create a snapshot virtual disk much faster than a physical
copy, using less disk space.
The virtual disk on which the snapshot is based, called the source virtual disk,
must be a standard virtual disk in your storage array. Typically, you create a
snapshot so that an application, such as a backup application, can access the
snapshot and read the data while the source virtual disk remains online and
accessible.
NOTE: No I/O requests are permitted on the source virtual disk while the virtual
disk snapshot is being created.
A snapshot repository virtual disk containing metadata and copy-on-write
data is automatically created when a snapshot virtual disk is created. The only
data stored in the snapshot repository virtual disk is that which has changed
since the time of the snapshot.
After the snapshot repository virtual disk is created, I/O write requests to the
source virtual disk resume. Before a data block on the source virtual disk is
modified, the contents of the block to be modified are copied to the snapshot
repository virtual disk for safekeeping. Because the snapshot repository virtual
disk stores copies of the original data in those data blocks, further changes to
those data blocks write only to the source virtual disk. The snapshot
book.book Page 145 Friday, September 23, 2011 2:46 PM

Table of Contents

Other manuals for Dell POWERVAULT MD3600F

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell POWERVAULT MD3600F and is the answer not in the manual?

Dell POWERVAULT MD3600F Specifications

General IconGeneral
HDD speed15000 RPM
RAID levels0, 1, 5, 6, 10
Data transfer rate8 Gbit/s
Storage drive size3.5 \
Storage drive capacity600 GB
Storage drive interfaceSerial Attached SCSI (SAS)
Storage drives installedYes
Installed storage drive typeHDD
Supported storage drive typesHDD & SSD
Total installed storage capacity3.6 TB
Maximum supported storage capacity36 TB
Number of storage drives installed6
Number of storage drives supported12
Chassis type-
Product colorGray
LED indicatorsPower, Status
AC input voltage90-264 V
AC input frequency47/63 Hz
Number of power supply units1
Power supply unit (PSU) capacity600 W
Operating altitude-16 - 3048 m
Operating temperature (T-T)10 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Weight and Dimensions IconWeight and Dimensions
Depth561 mm
Width446.3 mm
Height86.8 mm
Weight29300 g

Related product manuals