216 Configuration: Premium Feature— Remote Replication
To remove remote replication from a storage array:
1
In the
AMW
of the storage array containing the primary virtual disk, select
the
Logical
tab.
2
In the
Logical
pane, right-click the primary virtual disk of a replicated pair,
then select
Remove Replication Relationship
.
The
Remove Replication Relationship
dialog is displayed. The Replicated
pairs table shows all replicated pairs in both the local and remote storage array.
3
To remove a replication relationship, select one or more replicated pairs.
To select all replicated pairs, click
Select All
.
4
Click
Remove
.
The
Remove Replication Relationship - Confirmation
message is displayed.
5
Click
Yes
.
The Remove Replicated Pair - Progress bar shows the progress of the
removal process.
Deactivating the Remote Replication on the Storage Array
Before you can permanently disable the Remote Replication premium feature
you must deactivate it on the storage array, see "Disabling the Remote
Replication Premium Feature" on page 217. Deactivating the Remote
Replication premium feature on this storage array does not affect remote
virtual disk replications or the Remote Replication premium features on other
storage arrays. However, another storage array cannot use this storage array as
a remote storage array for creating a separate remote virtual disk replication.
To deactivate remote replication in a storage array:
1
In the
Array Management Window,
select
Storage Array
Remote
Replication
Deactivate
.
The
Deactivate Remote Replication
confirmation message is displayed.
2
Click
Yes
.
The Remote Replication premium feature is deactivated and the two
replication repository virtual disks are deleted from the storage array.
book.book Page 216 Friday, September 23, 2011 2:46 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
