Troubleshooting: Your Storage Array Software 275
2
Enter a name for the support data file in
Specify filename
or click
Browse
to navigate to a previously saved file to overwrite an existing file.
The suffix .zip is added automatically to the file if you do not specify a
suffix for the file.
3
Enter the
Execution summary
.
4
Click
Start
.
After all of the support files are gathered, they are archived using the file
name that you specified.
5
Click
OK
.
NOTE: If a support data operation is running, it must complete before another
support data operation can begin. Concurrent collections are not supported and
results in an error message.
Automatically Collect the Support Bundle Data
You can use the Collect Support Bundle option to automatically save a copy of
the support bundle when the client monitor process detects a critical event.
During a critical event, the support bundle is saved to the local physical disk
of the client system in the same area that is used for other recovery
information. This information is not overwritten for at least 72 hours.
WARNING: Use this option only under the guidance of your Technical Support
representative.
To automatically collect the support bundle data:
1
In the AMW, select
Advanced
Troubleshooting
Support Data
Automatic Settings
.
2
Select
Automatically collect support data for critical events
.
3
To change the location of the saved support bundle, click
Change
.
The
Change Folder Location
window is displayed, navigate to the relevant
folder and click
OK
.
4
To reset the default location, click
Reset
.
5
Click
OK
.
book.book Page 275 Friday, September 23, 2011 2:46 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
