EasyManuals Logo
Home>Dell>Storage>POWERVAULT MD3600F

Dell POWERVAULT MD3600F User Manual

Dell POWERVAULT MD3600F
318 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #183 background imageLoading...
Page #183 background image
Configuration: Premium Feature—Upgrading to High–Performance Tier 183
12
Configuration: Premium Feature—
Upgrading to High–Performance
Tier
The High Performance Tier premium feature on an MD3600f Series array
increases the performance of the system beyond that of an MD3600f Series
array operating at the standard performance level.
If this feature is ordered, a Premium Feature Activation card is placed in the
box with the storage array. After reading the information below, follow the
instructions on the card to obtain a key file and enable the feature.
CAUTION: Loss of data access – The storage array automatically restarts when
the High-Performance-Tier feature is enabled or disabled. During the restart, data
is unavailable. Data availability is restored when the array restarts.
To upgrade from a standard-performance-tier storage array to a high-
performance-tier storage array, you enable the high-performance-tier
premium feature, using the Dell PowerVault Modular Disk Storage
Management (MDSM) software.
When the high performance tier feature is enabled or disabled the array
restarts. During this time data access and management access to the
controller is temporarily lost.
It is recommended that all I/O to the array be stopped before this feature is
enabled or disabled.
While the array is restarting, the state of the array in the MDSM application
may change from Optimal to Unresponsive. When the restart completes the
status returns to Optimal.
When the array status returns to Optimal, I/O to the array can be restarted.
book.book Page 183 Friday, September 23, 2011 2:46 PM

Table of Contents

Other manuals for Dell POWERVAULT MD3600F

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell POWERVAULT MD3600F and is the answer not in the manual?

Dell POWERVAULT MD3600F Specifications

General IconGeneral
HDD speed15000 RPM
RAID levels0, 1, 5, 6, 10
Data transfer rate8 Gbit/s
Storage drive size3.5 \
Storage drive capacity600 GB
Storage drive interfaceSerial Attached SCSI (SAS)
Storage drives installedYes
Installed storage drive typeHDD
Supported storage drive typesHDD & SSD
Total installed storage capacity3.6 TB
Maximum supported storage capacity36 TB
Number of storage drives installed6
Number of storage drives supported12
Chassis type-
Product colorGray
LED indicatorsPower, Status
AC input voltage90-264 V
AC input frequency47/63 Hz
Number of power supply units1
Power supply unit (PSU) capacity600 W
Operating altitude-16 - 3048 m
Operating temperature (T-T)10 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Weight and Dimensions IconWeight and Dimensions
Depth561 mm
Width446.3 mm
Height86.8 mm
Weight29300 g

Related product manuals