Configuration: About Your Storage Array 79
Changing the Cache Settings on the Storage Array
1
In the AMW, select
Storage Array
Change
Cache Settings
.
The
Change Cache Settings
window is displayed.
2
Select or enter the percentage of unwritten data in the cache to trigger a
cache flush in
Start flushing
.
3
Select or enter the percentage of unwritten data in the cache to stop a
cache flush in progress in
Stop flushing
.
4
Select the appropriate
Cache block size
.
A smaller cache size is a good choice for file-system use or database-
application use. A larger cache size is a good choice for applications that
generate sequential I/O, such as multimedia.
5
In the
Enter Password
dialog, type the current password for the storage
array, and click
OK
.
Changing Expansion Enclosure ID Number
When an MD1200 series expansion enclosure is connected to an MD3600f
series storage array for the first time, an enclosure ID number is assigned and
maintained by the expansion enclosure. This enclosure ID number is also
displayed in the MDSM.
To change the enclosure ID numbers:
1
In the AMW, select the storage array, and select
Storage Array
Change
Enclosure ID
.
2
Select a new enclosure ID number from the
Change Enclosure ID
list.
The enclosure ID must be between 0 and 99 (inclusive).
3
To save the changed enclosure ID, click
Change
.
book.book Page 79 Friday, September 23, 2011 2:46 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
